PRTG Manual: HPE 3PAR Virtual Volume Sensor
The HPE 3PAR Virtual Volume sensor monitors the capacity of a virtual volume on an HPE 3PAR storage system.
For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.
- Dutch: HPE 3PAR Virtual Volume
- French: HPE 3PAR Virtual Volume
- German: HPE 3PAR Virtual Volume
- Japanese: HPE 3PAR Virtual Volume
- Portuguese: HPE 3PAR Virtual Volume
- Russian: HPE 3PAR Virtual Volume
- Simplified Chinese: HPE 3PAR Virtual Volume
- Spanish: Volumen virtual HPE 3PAR
- This sensor requires credentials for HPE 3PAR in settings that are higher in the object hierarchy.
- This sensor supports IPv6.
- This sensor has a very low performance impact.
- Knowledge Base: Where can I find the Web Services API (WSAPI) port for the connection to the HPE 3PAR system?
Setting |
Description |
---|---|
Sensor Name |
Enter a name to identify the sensor. By default, PRTG shows this name in the device tree, as well as in alarms, logs, notifications, reports, maps, libraries, and tickets.
|
Parent Tags |
The tags that the sensor inherits from its parent device, parent group, and parent probe.
|
Tags |
Enter one or more tags. Confirm each tag with the Spacebar key, a comma, or the Enter key. You can use tags to group objects and use tag-filtered views later on. Tags are not case-sensitive. Tags are automatically inherited.
The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:
|
Priority |
Select a priority for the sensor. This setting determines the position of the sensor in lists. The highest priority is at the top of a list. Choose from the lowest priority ( |
Setting |
Description |
---|---|
Name |
The name of the virtual volume that this sensor monitors. |
Provisioning Type |
The provisioning type of the virtual volume that this sensor monitors. |
Volume Type |
The volume type of the virtual volume that this sensor monitors. |
Size |
The size of the virtual volume that this sensor monitors. |
Setting |
Description |
---|---|
Primary Channel |
Select a channel from the list to define it as the primary channel. In the device tree, the last value of the primary channel is always displayed below the sensor's name. The available options depend on what channels are available for this sensor.
|
Graph Type |
Define how different channels are shown for this sensor:
|
Stack Unit |
This setting is only visible if you enable Stack channels on top of each other as Graph Type. Select a unit from the list. All channels with this unit are stacked on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so. |
Setting |
Description |
---|---|
Result Handling |
Define what PRTG does with the sensor result:
|
By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.
For more information, see section Inheritance of Settings.
The minimum scanning interval of this sensor is 1 minute.
The recommended scanning interval of this sensor is 5 minutes.
For more information, see section Root Group Settings, section Scanning Interval.
Schedules, Dependencies, and Maintenance Window
You cannot interrupt the inheritance for schedules, dependencies, and maintenance windows. The corresponding settings from the parent objects are always active. However, you can define additional schedules, dependencies, and maintenance windows. They are active at the same time as the parent objects' settings.
For more information, see section Root Group Settings, section Schedules, Dependencies, and Maintenance Window.
For more information, see section Root Group Settings, section Access Rights.
Which channel units are available depends on the sensor type and the available parameters. If no configurable channels are available, this field shows No configurable channels.
For more information, see section Root Group Settings, section Channel Unit Configuration.
Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.
Channel |
Description |
---|---|
Downtime |
In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status |
Snapshot Space Free |
The free snapshot space |
Snapshot Space Free % |
The free snapshot space (%) |
Snapshot Space Reserved |
The reserved snapshot space |
Snapshot Space Used |
The snapshot space that is already in use |
State |
The overall virtual volume status
|
Total Space |
The total space |
Total Space Free |
The total free space |
Total Space Free % |
The total free space (%) |
Total Space Reserved |
The total reserved space |
Total Space Used |
The total space that is in use |
User Space Free |
The free user space |
User Space Free % |
The free user space (%) |
User Space Reserved |
The reserved user space |
User Space Used |
The user space that is already in use |
KNOWLEDGE BASE
Where can I find the Web Services API (WSAPI) port for the connection to the HPE 3PAR system?
What security features does PRTG include?