PRTG Manual: SNMP NetApp I/O Sensor

The SNMP NetApp I/O sensor monitors the input/output operations per second (IOPS) on a NetApp storage system via the Simple Network Management Protocol (SNMP).

SNMP NetApp I/O Sensor

SNMP NetApp I/O Sensor

i_square_cyanFor a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

  • Dutch: SNMP NetApp I/O
  • French: NetApp E/S (SNMP)
  • German: SNMP NetApp E/A
  • Japanese: SNMP NetApp I/O
  • Portuguese: E/S NetApp (SNMP)
  • Russian: Ввод-вывод NetApp по SNMP
  • Simplified Chinese: SNMP NetApp I/O
  • Spanish: E/S NetApp (SNMP)

Remarks

  • This sensor only supports NetApp versions up to 8.2.
  • This sensor supports the IPv6 protocol.
  • This sensor has a very low performance impact.
  • If you use NetApp cDOT 8.3 or NetApp ONTAP as of version 9.0, we recommend that you use the NetApp I/O sensor instead.

Add Sensor

The Add Sensor dialog appears when you manually add a new sensor to a device. It only shows the settings that are required to create the sensor. You can change nearly all settings on the sensor's Settings tab after creation.

Basic Sensor Settings

Click the Settings tab of a sensor to change its settings.

Basic Sensor Settings

Basic Sensor Settings

Setting

Description

Sensor Name

Enter a name to identify the sensor.

Parent Tags

Shows tags that the sensor inherits from its parent device, parent group, and parent probe.

i_round_blueThis setting is for your information only. You cannot change it.

Tags

Enter one or more tags. Confirm each tag with the Spacebar key, a comma, or the Enter key. You can use tags to group objects and use tag-filtered views later on. Tags are not case-sensitive. Tags are automatically inherited.

i_round_blueIt is not possible to enter tags with a leading plus (+) or minus (-) sign, nor tags with parentheses (()) or angle brackets (<>).

i_round_blueFor performance reasons, it can take some minutes until you can filter for new tags that you added.

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

  • snmpnetappiosensor
  • snmpnetapp
  • netapp

Priority

Select a priority for the sensor. This setting determines the position of the sensor in lists. The highest priority is at the top of a list. Choose from the lowest priority (i_priority_1) to the highest priority (i_priority_5).

i_round_blueUsually, a sensor connects to the IP Address/DNS Name of the parent device. See the device settings for details. For some sensors, you can explicitly define the monitoring target in the sensor settings.

Sensor Display

Sensor Display

Sensor Display

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, the last value of the primary channel is always displayed below the sensor's name. The available options depend on what channels are available for this sensor.

i_round_blueYou can set a different primary channel later by clicking b_channel_primary below a channel gauge on the sensor's Overview tab.

Graph Type

Define how different channels are shown for this sensor:

  • Show channels independently (default): Show a graph for each channel.
  • Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
    i_round_redYou cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you enable Stack channels on top of each other as Graph Type. Select a unit from the list. All channels with this unit are stacked on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click b_inherited_enabled under the corresponding setting name to disable the inheritance and to display its options.

i_square_cyanFor more information, see section Inheritance of Settings.

Scanning Interval

Scanning Interval

Scanning Interval

i_square_cyanFor more information, see section Root Group Settings, section Scanning Interval.

Schedules, Dependencies, and Maintenance Window

i_round_blueYou cannot interrupt the inheritance for schedules, dependencies, and maintenance windows. The corresponding settings from the parent objects are always active. However, you can define additional schedules, dependencies, and maintenance windows. They are active at the same time as the parent objects' settings.

Schedules, Dependencies, and Maintenance Window

Schedules, Dependencies, and Maintenance Window

i_square_cyanFor more information, see section Root Group Settings, section Schedules, Dependencies, and Maintenance Window.

Access Rights

Access Rights

Access Rights

i_square_cyanFor more information, see section Root Group Settings, section Access Rights.

Channel Unit Configuration

i_round_blueWhich channel units are available depends on the sensor type and the available parameters. If no configurable channels are available, this field shows No configurable channels.

Channel Unit Configuration

Channel Unit Configuration

i_square_cyanFor more information, see section Root Group Settings, section Channel Unit Configuration.

Channel List

i_round_blueWhich channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel

Description

CIFS Ops

The number of Common Internet File System (CIFS) operations per second

Disk Read

The disk read speed in bytes per second

Downtime

In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status in percent.

Disk Write

The disk write speed in bytes per second

FCP Ops

The number of Fibre Channel Protocol (FCP) operations per second

FCP Read

The FCP read speed in bytes per second

i_round_blueThis channel is the primary channel by default.

FCP Write

The FCP write speed in bytes per second

HTTP Ops

The number of HTTP operations per second

ISCSI Ops

The number of Internet Small Computer System Interface (iSCSI) operations per second

ISCSI Read

The iSCSI read speed in bytes per second

ISCSI Write

The iSCSI read speed in bytes per second

Network Received

The number of bytes received per second

Network Sent

The number of bytes sent per second

NFS Ops

The network file system (NFS) operations per second

Tape Read

The tape read speed in bytes per second

Tape Write

The tape write speed in bytes per second

More

i_square_blueKnowledge Base

What security features does PRTG include?

My SNMP sensors don’t work. What can I do?