• Português
    • English
    • Deutsch
    • Español
    • Français
    • Italiano
    • Pусский

PRTG Manual: Cloud Ping Sensor

Important Notice

This sensor type is deprecated. The sensor still works but you cannot add it anew as of PRTG 22.x.78.

Alternative Sensor Type

Use the Cloud Ping v2 sensor instead.

The Cloud Ping sensor monitors the Transmission Control Protocol (TCP) ping times to its parent device from different locations worldwide via the PRTG Cloud. These locations are distributed among five continents around the globe.

Cloud Ping Sensor

Cloud Ping Sensor

z_i_square_cyanFor a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

  • Dutch: Cloud Ping
  • French: Cloud Ping
  • German: Cloud Ping
  • Japanese: クラウド Ping
  • Portuguese: Ping da nuvem
  • Russian: Пинг из облака
  • Simplified Chinese: 云 Ping
  • Spanish: Ping de nube

Remarks

Add Sensor

The Add Sensor dialog appears when you manually add a new sensor to a device. It only shows the settings that are required to create the sensor. You can change nearly all settings on the sensor's Settings tab after creation.

Setting

Description

Sensor Name

Enter a name to identify the sensor.

Parent Tags

Shows tags that the sensor inherits from its parent device, parent group, and parent probe.

i_round_blueThis setting is for your information only. You cannot change it.

Tags

Enter one or more tags. Confirm each tag with the Spacebar key, a comma, or the Enter key. You can use tags to group objects and use tag-filtered views later on. Tags are not case-sensitive. Tags are automatically inherited.

i_round_blueIt is not possible to enter tags with a leading plus (+) or minus (-) sign, nor tags with parentheses (()) or angle brackets (<>).

i_round_blueFor performance reasons, it can take some minutes until you can filter for new tags that you added.

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

  • pingsensor

Priority

Select a priority for the sensor. This setting determines the position of the sensor in lists. The highest priority is at the top of a list. Choose from the lowest priority (z_i_priority_1) to the highest priority (z_i_priority_5).

i_round_blueUsually, a sensor connects to the IP Address/DNS Name of the parent device. See the device settings for details. For some sensors, you can explicitly define the monitoring target in the sensor settings.

Ping Settings

Ping Settings

Ping Settings

Settings

Description

Packet Size (Bytes)

Enter the packet size in bytes for the Ping. You can enter any value between 1 and 10,000.

i_round_blueWe recommend that you use the default value.

Ping Count

Enter the number of Pings that PRTG sends in a row to the parent device in one scanning interval. Enter an integer. The default value is 1. The maximum value is 5.

Timeout (Sec.)

Enter a timeout in seconds for the Ping. If the reply takes longer than this value, PRTG cancels the request and shows an error message. Enter an integer. The maximum timeout value is 5 seconds.

Port

Enter the number of the port that the sensor uses for TCP ping. The default port is 80.

i_round_redThis sensor does not support port 25.

Sensor Display

Sensor Display

Sensor Display

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, the last value of the primary channel is always displayed below the sensor's name. The available options depend on what channels are available for this sensor.

i_round_blueYou can set a different primary channel later by clicking b_channel_primary below a channel gauge on the sensor's Overview tab.

Graph Type

Define how different channels are shown for this sensor:

  • Show channels independently (default): Show a graph for each channel.
  • Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
    i_round_redYou cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you enable Stack channels on top of each other as Graph Type. Select a unit from the list. All channels with this unit are stacked on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click z_b_inherited_enabled under the corresponding setting name to disable the inheritance and to display its options.

z_i_square_cyanFor more information, see section Inheritance of Settings.

Scanning Interval

Scanning Interval

Scanning Interval

z_i_square_cyanFor more information, see section Root Group Settings, section Scanning Interval.

Schedules, Dependencies, and Maintenance Window

i_round_blueYou cannot interrupt the inheritance for schedules, dependencies, and maintenance windows. The corresponding settings from the parent objects are always active. However, you can define additional schedules, dependencies, and maintenance windows. They are active at the same time as the parent objects' settings.

Schedules, Dependencies, and Maintenance Window

Schedules, Dependencies, and Maintenance Window

z_i_square_cyanFor more information, see section Root Group Settings, section Schedules, Dependencies, and Maintenance Window.

Access Rights

Access Rights

Access Rights

z_i_square_cyanFor more information, see section Root Group Settings, section Access Rights.

Channel List

i_round_blueWhich channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel

Description

Asia Pacific (Singapore) - Response Time

The response time of the target server at the location in msec

Asia Pacific (Sydney) - Response Time

The response time of the target server at the location in msec

Asia Pacific (Sydney) - Response Time

The response time of the target server at the location in msec

Downtime

In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status in percent.

EU Central (Frankfurt) - Response Time

The response time of the target server at the location in msec

EU West (Ireland) - Response Time

The response time of the target server at the location in msec

Global Average

The global average in msec

Global Average - Response Time

The global average response time in msec

i_round_blueThis channel is the primary channel by default.

South America (São Paulo) - Response Time

The response time of the target server at the location in msec

US East (N. Virginia) - Response Time

The response time of the target server at the location in msec

US West (N. California) - Response Time

The response time of the target server at the location in msec

US West (Oregon) - Response Time

The response time of the target server at the location in msec

More

z_i_square_blueKnowledge Base

Are there any limits for using Cloud Ping and Cloud HTTP sensors?

What is the PRTG Cloud Bot?

What security features does PRTG include?