PRTG Manual: OPC UA Server Status Sensor
The OPC UA Server Status sensor monitors the server status, uptime, and diagnostic information of an OPC Unified Architecture (OPC UA) server.
For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.
- Dutch: OPC UA Server Status
- French: État du serveur OPC UA
- German: OPC UA Serverzustand
- Japanese: OPC UA サーバーステータス
- Portuguese: Status de servidor OPC UA
- Russian: Состояние сервера OPC UA
- Simplified Chinese: OPC UA 服务器状态
- Spanish: Estado del servidor OPC UA
- This sensor requires activated diagnostic summary information settings on your OPC UA server to create all diagnostic channels.
- This sensor requires a valid port for the connection to the OPC UA server and credentials for OPC UA in the settings of the parent device.
- This sensor supports IPv6.
- This sensor has a very low performance impact.
- This sensor uses lookups to determine the status values of one or more channels.
Requirement |
Description |
---|---|
This sensor requires activated diagnostic summary information settings on your OPC UA server to create all diagnostic channels. Without activated diagnostic summary information settings, the sensor can only show the server status and the uptime.
|
Setting |
Description |
---|---|
Sensor Name |
Enter a name to identify the sensor. By default, PRTG shows this name in the device tree, as well as in alarms, logs, notifications, reports, maps, libraries, and tickets.
|
Parent Tags |
The tags that the sensor inherits from its parent device, parent group, and parent probe.
|
Tags |
Enter one or more tags. Confirm each tag with the Spacebar key, a comma, or the Enter key. You can use tags to group objects and use tag-filtered views later on. Tags are not case-sensitive. Tags are automatically inherited.
The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:
|
Priority |
Select a priority for the sensor. This setting determines the position of the sensor in lists. The highest priority is at the top of a list. Choose from the lowest priority ( |
Setting |
Description |
---|---|
Primary Channel |
Select a channel from the list to define it as the primary channel. In the device tree, the last value of the primary channel is always displayed below the sensor's name. The available options depend on what channels are available for this sensor.
|
Graph Type |
Define how different channels are shown for this sensor:
|
Stack Unit |
This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. All channels with this unit are stacked on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so. |
Setting |
Description |
---|---|
Result Handling |
Define what PRTG does with the sensor result:
|
By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.
For more information, see section Inheritance of Settings.
For more information, see section Root Group Settings, section Scanning Interval.
Schedules, Dependencies, and Maintenance Window
You cannot interrupt the inheritance for schedules, dependencies, and maintenance windows. The corresponding settings from the parent objects are always active. However, you can define additional schedules, dependencies, and maintenance windows. They are active at the same time as the parent objects' settings.
For more information, see section Root Group Settings, section Schedules, Dependencies, and Maintenance Window.
For more information, see section Root Group Settings, section Access Rights.
Which channel units are available depends on the sensor type and the available parameters. If no configurable channels are available, this field shows No configurable channels.
For more information, see section Root Group Settings, section Channel Unit Configuration.
Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.
Channel |
Description |
---|---|
Downtime |
In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status |
Rejected Requests Count |
The number of rejected requests |
Rejected Session Count |
The number of rejected sessions |
Security Rejected Requests Count |
The number of security rejected requests |
Security Rejected Session Count |
The number of security rejected sessions |
Server Status |
The server status
|
Session Abort Count |
The number of session aborts |
Session Count |
The number of sessions |
Session Timeout Count |
The number of session timeouts |
Subscription Count |
The number of subscriptions |
Uptime |
The uptime |
KNOWLEDGE BASE
What security features does PRTG include?