Monitor your network utilization
and prevent network problems
PRTG provides sensors for
measuring your network activity
PRTG shows you
unusual network activity
PRTG monitors the
performance of your networks
PRTG identifies the devices
that generate high traffic
Unlimited use of PRTG for 30 days. After 30 days PRTG reverts to the freeware edition.
You can upgrade to a paid license at any time.
What is network utilization?
Network utilization is the proportion of the current network traffic to the maximum amount of traffic that can be handled. It indicates the bandwidth consumption in the network. While high network traffic means that the network is overloaded, low network traffic means that the network is not busy. If the network load reaches or exceeds the threshold under normal conditions, this will result in low network speed, interruptions, timeouts, etc. The network load is an indicator of the network utilization.
Why is PRTG the ideal solution for monitoring your network utilization?
PRTG Network Monitor is the ideal tool to display and monitor the network utilization in your network. PRTG is easy to install and helps to detect vulnerabilities in your network. Especially if you have distributed locations, it is important to have an overview of the utilization of the WAN routes to be able to act quickly in case of high network utilization. This way, you can prevent timeouts or even complete network downtime.
5 problems that might arise when network utilization is too high
Slow file access
If the network has a high load, access to centrally stored data becomes slow or even impossible. For smaller files, the impact is rather small, but especially for applications that work with very large files, access becomes almost impossible.
If files are stored in databases, for example, timeouts can occur when the network load is high, and the files cannot be opened.
Limited internet access
The PRTG dashboard provides a quick overview, any time you like. You will immediately see if everything is alright. The dashboard is customizable to meet all your specific needs. While away from your desk – such as when working in the server room – PRTG can be accessed via smartphone apps so you never miss a beat.
Interrupted IP / video telephony
Especially for IP telephony, a sufficiently high amount of bandwidth is essential. If this is not available due to excessive network load, interruptions may occur. Video calls are then no longer possible in most cases.
Delayed or aborted backups
Data backups always generate a high network load. However, if your network is already very busy, the backups may be delayed or even aborted.
By monitoring your network utilization with PRTG, you prevent all these problems and lay the foundation for your network, applications, and services to be highly performant.
How PRTG prevents these problems
Network utilization monitoring
To avoid high load on your network, you are recommended to monitor it. While monitoring alone will not optimize your network, it does give you an overview of potential vulnerabilities. PRTG Network Monitor is perfectly suited for this. You can use it to analyze your network and make insightful decisions.
The next step is to identify servers, clients, or other devices on your network that are causing high network utilization. In addition, applications such as backup solutions, which are configured incorrectly, can cause this.
Optimize your network
After identifying what is causing a high load on your network, you can now adjust this. For example, prioritize applications or configure backups to start in the evening hours. A VLAN can also help.
PRTG provides a number of sensors that,
depending on the network configuration, help you detect problems
The SNMP RMON sensor monitors traffic on a device using the Remote Monitoring (RMON) standard SNMP. You can create it on an SNMP-compatible device that provides traffic data via RMON. Depending on the data that your device returns, PRTG displays traffic data for each port in different channels, which allows a detailed analysis. If available, the sensor queries 64-bit counters.
What is a sensor?
In PRTG, “sensors” are the basic monitoring elements. One sensor usually monitors one measured value in your network, e.g. the traffic of a switch port, the CPU load of a server, the free space of a disk drive. On average you need about 5-10 sensors per device or one sensor per switch port.
Paessler teams up with many partners
Partnering with innovative IT vendors, Paessler unleashes synergies to create
new and additional benefits for joined customers.
PRTG can do more
PRTG not only informs you about high network usage but can also inform you about unusually high utilization. This way you can act before it happens.
PRTG will alert you via email, SMS, push message, ... if a predefined or custom limit value is reached.
PRTG comes with predefined sensors for many manufacturers you can use out of the box, an alerting system, and technical support. If you opt for a license, you’ll get access to its full range of features. Only the number of sensors is limited.
PRTG in a nutshell
PRTG monitors your entire IT infrastructure
Traffic, packets, applications, bandwidth, cloud services, databases, virtual environments, uptime, ports, IPs, hardware, security, web services, disk usage, physical environments, IoT devices and almost everything you can imagine.
PRTG supports most technologies
SNMP (all versions), Flow technologies (i.e. NetFlow, jFlow, sFlow), SSH, WMI, Ping, and SQL. Powerful API (Python, EXE, DLL, PowerShell, VB, Batch Scripting, REST) to integrate everything else. See all PRTG features.
Still not convinced?
More than 500,000 sysadmins love PRTG
PRTG is used by companies of all sizes. Sysadmins love PRTG because it makes their job a whole lot easier.
Still not convinced?
Monitor your entire IT infrastructure
Bandwidth, servers, virtual environments, websites, VoIP services – PRTG keeps an eye on your entire network.