PRTG: Monitoring software
for all your HP devices
Monitoring of all the SNMP-compatible HP devices
in your network
HP computers, printers, switches, routers, HPE ProLiant servers, HPE BladeSystems, and more
Automated alarm
and reporting functions
PRTG monitors your HP devices
PRTG gathers data from your HP printer, HPE BladeSystem, and HPE ProLiant server
Manufacturers like Hewlett Packard Enterprises (HPE) offer a wide selection of IT products – including printers, computers, switches, and servers. As with all hardware, system administrators must also be ready to tackle the faulty hard drives, server problems, printer errors, and other issues of HP systems.
Centralized HP monitoring lets you spot problems before they arise, and is quick to send out alarms.
PRTG is your all-in-one network monitoring solution. It monitors all your SNMP-compatible HP devices, which means you no longer have to use a different monitoring tool for each piece of hardware. All monitoring information is neatly displayed on your dashboard or presented in easy-to-read reports.
Monitoring HP computers
PRTG sounds the alarm if you’re running low on hard disk space or memory, and logs all data from past time periods. As a result, data losses are avoided, and hard disks and other hardware can be replaced or upgraded quickly.
Monitoring HPE ProLiant servers
By monitoring CPU and main memory loads, data traffic on the network interface, and the overall system status, PRTG can quickly notify you if a server becomes overloaded. As a result, you can redistribute the load, eliminate potential sources of errors, and prevent performance snags and server downtime.
Monitoring HPE BladeSystems
PRTG displays the system health of your HPE BladeSystem enclosures, and notifies you as soon as something goes awry. PRTG also makes it easy to check the status of an HPE blade, including its power supply.
Monitoring printers, routers, and other HP hardware
PRTG also checks network printers and other SNMP-compatible hardware for errors (e.g. HP ProCurve switches). Prompt notifications let you get to work before the first support ticket has a chance to arrive.
With PRTG, you'll maintain full control over all your HP devices.
How HP monitoring with PRTG works
In PRTG, “sensors” are the basic monitoring elements. One sensor usually monitors one measured value in your network, e.g. the traffic of a switch port, the CPU load of a server, the free space of a disk drive. On average you need about 5-10 sensors per device or one sensor per switch port. 
How PRTG defines sensors
HP hardware monitoring
PRTG uses both pre-configured and customizable sensors to monitor HP hardware. These sensors collect all the necessary information, and display the queried data in PRTG. PRTG promptly warns you if the return values might be indicative of a glitch, allowing you to quickly get down to troubleshooting your hardware or network.
Ping tests
Ping tests are used to check the availability of servers and work computers. If a Ping test fails, the device is either shut off or down, or there is a problem with the network connection – the error might lie with a cable that is unplugged or damaged.
Ping is a command-line utility, available on virtually any operating system with network connectivity, that acts as a test to see if a networked device is reachable. The ping command sends a request over the network to a specific device. A successful ping results in a response from the computer that was pinged back to the originating computer.
Read more
Save resources with SNMP
PRTG monitors all SNMP-compatible HP devices. SNMP (Simple Network Management Protocol) is the easiest method for querying sensor data from the network, and also the protocol that uses the fewest amount of resources. SNMP is known for putting very little strain on the CPU and network loads. If your HP hardware is SNMP-compatible, then you can use PRTG to collect a great deal of valuable data from it.
HPE ProLiant servers
We’ve configured several sensors especially for HPE ProLiant servers. These sensors will allow you to monitor your HP server’s logical disk, memory controller, network interface, physical disk, and system health – out of the box and without complicated setup procedures! PRTG also comes with built-in sensors for your HPE BladeSystem: these sensors will show you the status of the blade and the system health of the blade enclosure. You can even monitor your HP LaserJet printer with its own specially-designed sensor: quickly check toner and paper levels, and be informed immediately in the event of a paper jam!
An introduction to hardware monitoring with PRTG
SNMP HPE ProLiant System Health Sensor
"Sunburst" dashboard in PRTG
Sensor HPE ProLiant Physical Disk
Data collected by PRTG
SNMP stands for Simple Network Management Protocol. Its usefulness in network administration comes from the fact that it allows information to be collected about network-connected devices in a standardized way across a large variety of hardware and software types. SNMP is a protocol for management information transfer in networks, for use in LANs especially, depending on the chosen version.
Read more
HP laptops and desktop computers
PRTG sensors let you monitor CPU and memory usage, bandwidth consumption, and the system information of your HP laptops and desktop computers.
Printer availability
You’ll get information on the availability of your HP printer, its toner level, and the number of pages it has printed, and be notified immediately if the printer is jammed with paper.
System health
Monitor the system health and hard drives of your HPE ProLiant server: temperature, fan status, power supply status, and power consumption, as well as the statuses of the hard drive controller, logical and physical disks, and memory controller. You’ll also be able to keep a constant eye on data throughput on the ProLiant network interface.
Network traffic
SNMP traffic sensors provide a clear idea of network traffic on HP routers and switches (such as an HP ProCurve switch).
Blade systems
Thanks to its generic and customizable SNMP sensors, PRTG can monitor any type of SNMP-compatible HP hardware.
SNMP-compatible hardware
PRTG monitors all SNMP-compatible HP devices. SNMP (Simple Network Management Protocol) is the easiest method for querying sensor data from the network, and also the protocol that uses the fewest amount of resources. SNMP is known for putting very little strain on the CPU and network loads. If your HP hardware is SNMP-compatible, then you can use PRTG to collect a great deal of valuable data from it.
Custom sensors
In addition to pre-configured sensors, PRTG also offers user-defined sensors which allow you to monitor the data on an end device using your own scripts, which are run via the PRTG API.
Andreas Reimann, Senior Networking Communication Architect at Zürich Airport. Zürich Airport uses more than 4,500 sensors for its monitoring
“The support we received from Paessler AG was extremely reassuring. Their reaction time, know-how, and solutions were outstanding in every department.”
Trusted by 500,000 users and recognized
by industry analysts as a leader
“Fantastic network and infrastructure monitoring solution that is easy to deploy and easier still to use. Simply the best available.”
“Software is absolutely perfect, Support is superior. Meets all needs and requirements, this is a must have solution if you are needing any form of monitoring.”
“The tool excels at its primary focus of being a unified infrastructure management and network monitoring service.”
4 reasons to choose PRTG as your HP monitoring tool
Secure work processes
By monitoring the HP servers, printers, and equipment of your coworkers, you'll make sure that at your company, it’s business as usual. And with prompt troubleshooting, you can prevent crashes and save money.
Obtain an overview
PRTG automatically gathers the desired sensor data and displays it on an easy-to-read dashboard. Create custom reports so the management team also gets just the information they need.
Automated warning messages
In the event of a looming server failure, a spike in memory usage, or a problem with a printer, PRTG will automatically shoot you an email or SMS, or send a push notification via the app.
One solution for all your HP devices
Do away with the host of tools you are currently using to monitor your HP devices. Thanks to the PRTG sensors and alerts, your SNMP-compatible HP devices get all the attention they deserve.
Check the status of an HP device in a flash – even while on the go
Set up PRTG in minutes and use it on almost any mobile device.
PRTG makes your job easier
Our monitoring software frees you to focus on other tasks by promptly notifying you of potential issues.
Save effort
PRTG gives you one central monitoring tool for your servers and entire network. Enjoy a quick overview of your whole infrastructure via our dashboard and app.
Save time
Getting started with PRTG is a breeze. Setting up or switching from another network monitoring tool is easy thanks to the auto-discovery and pre-configured device templates.
Save money
80% of our customers report substantial cost savings with network monitoring. Your costs of licenses will likely pay for themselves within weeks.
Want to read more? Please do!
Real-time Network Monitoring: Keep an eye on your network usage in real time and monitor your data centers, devices like computers, routers or switches, your server availability, and your websites.
Server Health Monitoring: PRTG reliably secures the server room and monitors temperature fluctuations, humidity, and power outages and therefore ensures your servers run smoothly.
Storage Monitoring: PRTG checks your hard disks and displays all memory capacities on one dashboard. Monitoring of NAS devices of vendors like Synology or Storage Area Networks (SAN) is also possible.
Fortinet Monitoring: Check the status of your Fortinet products and get alerts as soon as your Fortinet solution
identifies a security risk.
“Easy to implement and configure with good technical support.”
R. v. S., ICT Manager at Heinen & Hopman Eng BV
PRTG: The multi-tool for sysadmins
Adapt PRTG individually and dynamically to your needs and rely on a strong API:- HTTP API: Access monitoring data and manipulate monitoring objects via HTTP requests
- Custom sensors: Create your own PRTG sensors for customized monitoring
- Custom notifications: Create your own notifications and send action triggers to external systems
- REST Custom sensor: Monitor almost everything that provides data in XML or JSON format
Still not convinced?
More than 500,000 sysadmins love PRTG
Paessler PRTG is used by companies of all sizes. Sysadmins love PRTG because it makes their job a whole lot easier.
Still not convinced?
Monitor your entire IT infrastructure
Bandwidth, servers, virtual environments, websites, VoIP services – PRTG keeps an eye on your entire network.
Try Paessler PRTG for free
Everyone has different monitoring needs. That’s why we let you try PRTG for free. Start now with your trial.
|
PRTG |
Network Monitoring Software - Version 24.2.94.1400 (April 10th, 2024) |
|
Hosting |
Download for Windows and cloud-based version PRTG Hosted Monitor available |
Languages |
English, German, Spanish, French, Portuguese, Dutch, Russian, Japanese, and Simplified Chinese |
Pricing |
Up to 100 sensors for free (Price List) |
Unified Monitoring |
Network devices, bandwidth, servers, applications, virtual environments, remote systems, IoT, and more |
Supported Vendors & Applications |
|
Combining the broad monitoring feature set of PRTG with IP Fabric’s automated network assurance creates a new level of network visibility and reliability.