Trace network traffic with PRTG...
...and keep a constant eye on everything
Network traffic and
data packet tracer
Packet Sniffing, Flow, SNMP
Monitor routers, switches,
ports, and servers
Unlimited version of PRTG for 30 days. After 30 days, PRTG reverts to a free version.
Or, you can upgrade to a paid license anytime.
Trace network traffic with PRTG
- Sensors for tracing your network traffic
- 5 advantages of PRTG for conveniently tracing your network traffic
- Network traffic: Monitoring vs. recording
- Traceroute tools in Linux and Windows
- The following 2 articles from our blog take a closer look at Traceroute
- How to record port traffic
- Reader tips from our Knowledge Baseon “trace” and “hops”
- Perform a traceroute on a server
Sensors for tracing your network traffic
iWhat is a sensor?
In PRTG, “Sensors” are the basic monitoring elements. One sensor usually monitors one measured value in your network, e.g. the traffic of a switch port, the CPU load of a server, the free space of a disk drive. On average you need about 5-10 sensors per device or one sensor per switch port.
Tracerouter Hop Count Sensor
The Traceroute Hop Count Sensor measures the time and number of hops a data packet needs to reach its destination. It therefore helps you gauge the stability of your network. This sensor can also sound the alarm if a data packet’s route changes.
Packet Sniffer Sensor
The Packet Sniffer Sensor is a vital sensor for tracing network traffic. It displays the amount of bandwidth needed for connections and applications such as web, mail, and FTP traffic, as well as the origin and destination of data. More on packet sniffing.
IPFIX Sensor, NetFlow V5/V9, or jFlow and sFlow: PRTG comes with Flow sensors that monitor devices from Cisco, as well as other manufacturers which support Flow technology. This sensor also displays the connections and applications that use the most bandwidth. More on NetFlow monitoring and IPFIX monitoring.
5 advantages of PRTG for conveniently tracing your network traffic
PRTG is always accessible
PRTG consolidates all your monitoring information into an easy-to-read, customizable dashboard. A quick glance is all it takes to know that everything is OK.
Thanks to the Auto Discovery feature, which pings a specific range of IP addresses, PRTG is set up and ready to go in no time. You can therefore start checking your network traffic at once.
PRTG comes with over 200 predefined sensors. It also offers customizable sensors (“custom sensors”) that can monitor the values which are most important to your company.
Is your data line about to overload? PRTG promptly lets you know if your traffic increases and risks causing problems in your network. Its built-in alarm feature is fast-acting, and allows you to take action at once.
With a PRTG license, you get the full range of sensors, the notification system (alarm), the reports feature, and technical support. There are no hidden fees whatsoever. And that is sure to make your higher-ups happy.
Network traffic: Monitoring vs. recording
Network traffic monitoring
PRTG is a network monitoring tool that allows you to monitor your traffic as well as the status of your hardware and applications. PRTG provides you with a constant ove.
Network traffic recording
If you specifically wish to record your traffic and have a look at individual data packets, then you will need another type of software. There are many such tools on the market.
“The Packet Sniffer Sensor allows you to analyze traffic in your network in much the same way as deep packet inspection. You can see, for example, if mail traffic is alarmingly high, or if P2P file sharing is being used in your company network and thus posing a risk to network security.” Stephan Linke, Paessler Technical Support
“Hey Stephan, do you have any tips for packet sniffing
“The Packet Sniffer Sensor allows you to analyze traffic in your network in much the same way as deep packet inspection. You can see, for example, if mail traffic is alarmingly high, or if P2P file sharing is being used in your company network and thus posing a risk to network security.”
Stephan Linke, Paessler Technical Support
Traceroute tools in Linux and Windows
Trace Route (or “Traceroute”) is a command line tool in Linux/Unix. It lets you trace the route of data in your network. Individual hops are captured and recorded. As a result, you can identify bottlenecks and disruptions.
A similar command line tool exists for Windows. This tool is called “Tracert.” Tracert also allows you to determine the path of data packets by entering commands in the command line. With Tracert, you can pinpoint (for example) where a data packet got delayed.
Unlike command line tools such as Traceroute and Tracert which are used selectively, PRTG continually monitors your entire IT structure. In the event of delays, disruptions, or crashes, PRTG immediately sounds the alarm. There are many possible reasons for a data packet not reaching its destination. With PRTG, troubleshooting is a whole lot faster and easier.
The following 2 articles from our blog
take a closer look at Traceroute
Trusted by 200.000 users
and recognized by industry analysts as a leader
How to record port traffic
Why port monitoring is important
Open ports are gateways for Trojan horses and other attacks. Ports are often used on a temporary basis. In large, unmonitored networks, there are almost always open ports which go forgotten. Monitoring data traffic across network ports is important to prevent overloads and sniff out suspicious traffic.
Port traffic: How PRTG can help
PRTG monitors open and closed ports. The network monitoring tool monitors all traffic and records the connections. As an IT manager, you therefore get a constant overview of the traffic that flows through your ports.
Sensors for recording port traffic
PRTG comes with a number of preconfigured port sensors. These include the above-mentioned SNMP Traffic Sensor, Packet Sniffer Sensor, and Flows sensors, as well as the Port Sensor and the Port Range Sensor, which monitors a range of ports and indicates whether these ports are open or closed. More on port monitoring.
Reader tips from our Knowledge Base
on “trace” and “hops”
Reader tip 1: How can I monitor the IP addresses of hops?
Reader tip 2: How can I increase the maximum number of hops?
Our Knowledge Base is chock full of tips and articles from our support team.
If you have a question on PRTG, simply send us an email. We'll be happy to help! Technical support is included with PRTG at no extra charge.
Perform a traceroute
on a server
With PRTG, you can perform a traceroute on a specific server or another network device with just two clicks of the mouse.
- The target device should already be incorporated into your monitoring. If not, add the desired device to PRTG.
- In the PRTG device tree, scroll down to the device upon which you would like to perform the traceroute.Right-click on the device to open its context menu.In the “Device Tools” menu, click on “Traceroute...”.
- Right-click on the device to open its context menu.
- In the “Device Tools” menu, click on “Traceroute...”.
PRTG will now perform a traceroute on the target device and display the results in a matter of seconds.
Keep a constant eye on your network
– even while on the go
PRTG can be started within minutes and it's compatible with many mobile devices.
Over 95% of our customers recommend PRTG
Paessler AG worldwide trialled PRTG in over 600 IT departments.
The aim was to tune the network monitoring software closer to the needs of the administrators.
The result of the survey: over 95% of the participants would recommend PRTG - or already had.
Learn more about how to trace and monitor your
QoS monitoring – Do away with delays
PRTG comes with several QoS sensors which are perfect for quality of service monitoring. With these sensors, you will discover when (and why) delays and disruptions occur in your VoIP. Other QoS-related topics include jitter monitoring and the analysis of packet loss.
IP SLA monitoring
PRTG comes with special sensors for Cisco devices. With IP SLA monitoring, evaluating the quality of service of your Cisco routers and switches is easy.
When processors are overloaded, the entire network is brought to its knees. PRTG lets you monitor the CPUs of servers, routers, and switches. In the event of bottlenecks, you’ll be notified at once.
PAESSLER AG –
- Unlimited version of PRTG for 30 days
- After 30 days, PRTG reverts to a free version
- Or, you can upgrade to a paid license anytime
Most administrators want to test a tool for free before deciding to make an investment.
The many advantages of PRTG:
1. Free trial version: Take the time to explore PRTG so you can determine if it satisfies your needs and meets your expectations. Once the trial is over, it’s easy to upgrade your already configured version of PRTG, which means you’re much less likely to make an incorrect purchase.
2. One tool, one overview: Administrators often use a variety of monitoring solutions for their network or for the individual components of their infrastructure. But using several different tools every time you want to create an overview costs time and energy. PRTG is an “all-in-one” solution. Our dashboard and app provide a comprehensive overview, whenever you want it.
3. Quick customer support: Got a question? Stuck on a problem and need a hand? PRTG is backed by a dedicated development and support team. We do our utmost to answer every customer inquiry within 24 hours (on business days). Browse all our support topics here.
Configure your PRTG today. The trial version is free of charge. Save time, worry, and money with our monitoring tool designed for your network and entire infrastructure.
|Network Monitoring Software - Version 188.8.131.526 (April 1st, 2020)|
|Download for Windows and hosted version available|
|English, German, Spanish, French, Portuguese, Dutch, Russian, Japanese, and Simplified Chinese|
|Up to 100 sensors for free (Price List)|
|Network devices, bandwidth, servers, applications, virtual environments, remote systems, IoT, and more|
Supported Vendors & Applications