Cisco network monitoring –
fully integrated with PRTG
- PRTG monitors your Cisco devices out of the box
- PRTG features special sensors designed just for Cisco devices
- PRTG integrates technologies such as SNMP and NetFlow
- PRTG increases the security of your network and the quality of your service
PRTG: An easy-to-use Cisco monitoring tool –
at no extra charge
How does Cisco Monitoring with PRTG work?
iWhat is a sensor?
In PRTG, “Sensors” are the basic monitoring elements. One sensor usually monitors one measured value in your network, e.g. the traffic of a switch port, the CPU load of a server, the free space of a disk drive. On average you need about 5-10 sensors per device or one sensor per switch port.
Specially designed sensors for a better look inside your Cisco network
Cisco offers powerful solutions in several areas, from network management and unified communication to routing and switching management. By professionally monitoring Cisco-related parameters, you can exhaust all the possibilities – at no extra charge. Remaining true to our “all-inclusive” philosophy, we have also provided access to all Cisco sensors in the PRTG freeware version. Simply activate the sensors and get started with monitoring Cisco devices.
Effortlessly obtain an overview of the system status, find out all there is to know about a device status and your network hardware like routers or switches, gain valuable information on traffic, connections, and users, and get help making service management decisions. With PRTG, you’ll guarantee system health, high performance, connection stability, and application security in your Cisco networks.
Part of the Cisco ecosystem, Paessler has developed sensors especially for Cisco devices. Additional sensors use Cisco-specific NetFlow technology for traffic monitoring. From ADSL to VPN connections, all the way to Voice over IP applications: PRTG ensures the quality of your service.
With PRTG, everyone can work with peace of mind.
We expect only the best –
and are therefore a Cisco Solution Partner
We’re a registered Cisco Solution Partner. According to Cisco, “Paessler simplifies the overall Cisco technology portfolio with products that are proven compatible with Cisco and share Cisco’s high customer service expectations.”
Cisco router monitoring
Cisco routers are extremely stable and offer high levels of security. No wonder so many sysadmins like to use Cisco routers for their networks. These devices are primarily used at companies. With PRTG, you can easily monitor your Cisco routers with NetFlow or SNMP.
Cisco switch monitoring
Also extremely popular: Cisco switches. Switches, however, are often the bottlenecks in a network. If a Cisco switch malfunctions or becomes overloaded, the entire network can suffer. Professional switch monitoring is therefore a vital part of network monitoring. If problems arise, you’ll be alerted automatically.
Cisco port monitoring
Many sysadmins search for a monitoring tool just for their Cisco ports. They want to find out if their Cisco ports are working properly, as well as determine how much (and which) traffic is flowing through the ports. PRTG uses NetFlow, SNMP, and packet sniffers to monitor open and closed Cisco ports.
Cisco QoS at a glance
Looking to monitor the quality of service of your Cisco devices? PRTG has developed a sensor that can do so. The SNMP Cisco CB QoS Sensor uses data from Cisco’s Class-Based Quality of Service.
Cisco IP SLA monitoring
If you have a Cisco device that supports IP SLA, then you can use a preconfigured PRTG sensor for your Cisco IP SLA monitoring. As a result, you can monitor your service level agreements and in turn, your quality of service.
A quick introduction to PRTG:
Your Cisco network at a glance
– even on the go
PRTG can be started within minutes and it's compatible with many mobile devices.
PRTG lets you take advantage of a wide variety of predefined Cisco sensors which means less time for configuration. You can also create individual Cisco sensors with just a few clicks.
- Cisco IP SLA Sensor: Quality of service monitoring, e.g. the monitoring of VoIP applications, which are especially prone to data delays and losses
- SNMP Cisco ADSL Sensor: ADSL statistical monitoring
- SNMP Cisco CBQoS Sensor: Data monitoring according to categories of traffic before and after the introduction of new rules for improving the quality of service
- SNMP Cisco ASA VPN Traffic/Connections/User: Monitor Cisco Adaptive Security Appliance (ASA) Virtual Private Network (VPN) connections
- IPFIX, NetFlow 9, and NetFlow 5 Sensors: Sensors for traffic monitoring in networks with Cisco’s NetFlow technology
Discover more predefined sensors for monitoring your network devices, performance, and uptime here.
i NetFlow is a protocol for collecting, aggregating and recording traffic flow data in a network. NetFlow data provide a more granular view of how bandwidth and network traffic are being used than other monitoring solutions, such as SNMP. NetFlow was developed by Cisco and is embedded in Cisco’s IOS software on the company’s routers and switches and has been supported on almost all Cisco devices since the 11.1 train of Cisco IOS Software.
1. Quality enhanced by membership in a developer network
Member of the Cisco Developer Network, PRTG provides custom-fit sensors for your Cisco network so you can always be on the safe side.
2. No additional costs for Cisco sensors
Many software companies charge additional fees for Cisco sensors. But thanks to our “all-inclusive” philosophy, you can use any sensors you please, even in the freeware version.
3. Easy VoIP benchmarking
Because they are especially prone to data delays and losses, certain parameters are pre-calculated right from the analysis stage (e.g. ICPIF, MOS). This makes it possible for benchmarking to be performed directly, without additional calculations.
4. Complete quality assurance monitoring
By merging all relevant parameters in just a few sensors, you can easily measure the service quality of your Cisco network and use your findings to make sound decisions.
5. High-performance monitoring via SNMP
Using SNMP technology (if possible and if it makes sense to do so), parameters can be gathered such as statistics on CPU usage and the ADSL connections of your Cisco router under minimal bandwidth consumption.
6. Overview of all IPsec VPN connections
For those Cisco devices with Adaptive Security Appliance (ASA), you get an easy-to-read overview of traffic, users, and IPsec-secured VPN connections. Which users are online and offline? Finding out is a cinch with the PRTG sensors.
7. Quick creation of multiple sensors for VPN connections
By activating the ASA VPN sensors, you can quickly set up additional VPN connections for monitoring. This frees you up from having to create a separate sensor for each individual connection.
8. System health at a glance
9. Perfect compatibility with Cisco NetFlow technology
Six sensors help high-traffic networks monitor their data traffic and ensure high network performance. The sensors, both in their standard and customizable versions, are compatible with NetFlow protocols IPFIX, NetFlow 9, and NetFlow 5.
10. Automatic notifications
Should an error occur or one of your self-defined thresholds be exceeded, you’ll be notified immediately, wherever you happen to be.
11. Automation for a lighter workload
With the sensors and notifications of PRTG, you no longer need to take the time to check each and every device manually.
12. Better network security
Thanks to our Cisco-specific sensors and extremely clear-cut monitoring, you’ll be quicker to spot security loopholes in your Cisco devices.
John Krull, CTO, Oakland Unified School District, USA
An IT infrastructure for 5,000 students:
Bauhaus University in Weimar monitors its Cisco hardware with PRTG
“Soon after implementing PRTG, we were able to identify and eliminate load problems in our network and performance bottlenecks in our VMware environment. PRTG also notified us of a malfunctioning hard drive on a Cisco UCS blade server.”
Steffen Ille, Director of the IT Infrastructure Department To case study (German)
Simple Network Management Protocol (SNMP) is the easiest way to monitor your network. Network and CPU loads are minimal; an analysis with regard to protocol or an IP address however is impossible. We use this protocol whenever we can to enjoy the most efficient of monitoring.
NetFlow is a Cisco technology in which bandwidth usage is determined within a device and collectively transmitted to PRTG. Bandwidth consumption, therefore, is minimized. NetFlow offers a higher degree of detail (e.g. per network protocol/IP address) than SNMP, and because of its low consumption is ideal for cisco networks with a large amount of traffic.
iBandwidth is measured as the amount of data that can be transferred from one point to another within a network in a specific amount of time. Typically, bandwidth is expressed as a bitrate and measured in bits per second (bps). It refers to the transmission capacity of a connection and is an important factor when determining the quality and speed of a network.
Cisco network monitoring tools: 3 short comparisons
PRTG vs. Cisco Prime
Cisco offers its own monitoring software called “Cisco Prime Network Analysis Module.” But many sysadmins manage IT infrastructures that have developed over several years and contain hardware from a variety of manufacturers. PRTG incorporates the technology you’ll need to monitor the hardware of several different manufacturers. All monitoring data comes together on an easy-to-read dashboard.
PRTG vs. Nagios
A variety of open-source software (such as Nagios) is available for Cisco monitoring (see in-depth comparison). Open-source software is usually cheaper in the short run. But its setup can be considerably more difficult. And more often than not, open-source software lacks important functions that you’ll have to integrate later. PRTG is easy to set up and all-inclusive, and even comes with a fantastic technical support team who usually answer your inquiries within 24 hours on weekdays.
PRTG vs. SolarWinds
You can also choose from proprietary software to monitor your Cisco hardware. This software includes large, comprehensive tools such as SolarWinds (to in-depth comparison). The advantage of PRTG – from our point of view: PRTG licenses are transparent and straightforward, and include Cisco monitoring. What’s more, specialized tools such as Zabbix are only isolated solutions.
FAQ: Cisco monitoring
When do I use SNMP, Flow, or packet sniffing? Which filter rules can I apply? How should I configure my Cisco devices to provide for the smoothest possible monitoring? Find the answers to these and other questions in our knowledge base. While there, why not have a look around?
Cisco Network Monitoring Tools like Cisco Network Assistant can often only monitor either a specific part of the network or specific devices. PRTG is an All-in-One Monitoring tool with lots of other features like:
Fortinet Monitoring: Check the status of your Fortinet products and get alerts as soon as your Fortinet solution identifies a security risk.
Data Center Monitoring: Data centers are the heart of every IT infrastructure. PRTG monitors your data center 24/7, ensures high performance and avoids bottlenecks and outages.
PAESSLER AG –
- Unlimited version of PRTG for 30 days
- After 30 days, PRTG reverts to a free version
- Or, you can upgrade to a paid license anytime
Made in Germany: The PRTG Network Monitoring Tool is the fruit of an engaged team. The company was founded by Dirk Paessler. The Paessler AG headquarters are located in the city of Nuremberg, in the heart of Germany. We combine typical German virtues such as high quality standards, industriousness, and commitment with international, cosmopolitan flair. Read more about our firm here. By the way: We are regularly looking for new recruits. Case Studies: Airports, utility companies, banks, colleges, hospitals: PRTG is present in every industry. For each of our customers, business and organizational processes depend on the proper functioning of the network infrastructure. The PRTG customer satisfaction is close to 100%. Read in our case studies how our customers use PRTG. Product tests: It goes without saying that we are convinced by the quality of PRTG. But what about the others? PRTG has always performed extremely well in tests. PRTG user “LanLine” sums it up best: “PRTG was already good several years ago, and has gotten better from version to version ever since.” Such has been our steadfast and sincere goal. Read more about monitoring software product tests and comparisons here. Support: Our support team works hard every day to help customers solve their monitoring problems. Our goal is to resolve all inquiries within 24 hours (on business days). We've drafted a comprehensive manual and built up an extensive knowledge base featuring videos, webinars, and FAQs. All support, of course, is also included! Getting started is easy: The trial version is free, which means you can try our monitoring tool risk-free. To switch to another version of PRTG, simply search for an appropriate license. You can upgrade any time you like.
Made in Germany: The PRTG Network Monitoring Tool is the fruit of an engaged team. The company was founded by Dirk Paessler. The Paessler AG headquarters are located in the city of Nuremberg, in the heart of Germany. We combine typical German virtues such as high quality standards, industriousness, and commitment with international, cosmopolitan flair. Read more about our firm here. By the way: We are regularly looking for new recruits.
Case Studies: Airports, utility companies, banks, colleges, hospitals: PRTG is present in every industry. For each of our customers, business and organizational processes depend on the proper functioning of the network infrastructure. The PRTG customer satisfaction is close to 100%. Read in our case studies how our customers use PRTG.
Product tests: It goes without saying that we are convinced by the quality of PRTG. But what about the others? PRTG has always performed extremely well in tests. PRTG user “LanLine” sums it up best: “PRTG was already good several years ago, and has gotten better from version to version ever since.” Such has been our steadfast and sincere goal. Read more about monitoring software product tests and comparisons here.
Support: Our support team works hard every day to help customers solve their monitoring problems. Our goal is to resolve all inquiries within 24 hours (on business days). We've drafted a comprehensive manual and built up an extensive knowledge base featuring videos, webinars, and FAQs. All support, of course, is also included!
Getting started is easy: The trial version is free, which means you can try our monitoring tool risk-free. To switch to another version of PRTG, simply search for an appropriate license. You can upgrade any time you like.
|Network Monitoring Software - Version 188.8.131.526 (April 1st, 2020)|
|Download for Windows and hosted version available|
|English, German, Spanish, French, Portuguese, Dutch, Russian, Japanese, and Simplified Chinese|
|Up to 100 sensors for free (Price List)|
|Network devices, bandwidth, servers, applications, virtual environments, remote systems, IoT, and more|
Supported Vendors & Applications