PRTG Traffic Grapher 6
Note: This page contains articles for PRTG Traffic Grapher 6 only. Please visit the new Knowledge Base for information on other Paessler software products.
PRTG Traffic Grapher V6
- PRTG Traffic Grapher V6 (26)
- Analyzing runtime problems of PRTG Traffic Grapher
- Customizing Panel Layouts for Custom Graphs
- Why do I see Huge Peaks or Spikes in Graphs for SNMP Sensors?
- What is shown in the "Coverage" column in data tables of PRTG Traffic Grapher?
- How can I change the colors of the sensor list in the web interface of PRTG Traffic Grapher
- Using live graphs from PRTG in other webpages using static image URLs
- Upgrading from PRTG Version 3 to Version 6
- Upgrading from PRTG Version 4 to Version 6
- How to Discern Excessive Bandwidth Usage using PRTG Traffic Grapher
- Changing existing PRTG custom sensors from Delta to Gauge (and vice-versa)
- Binding historic datasets to new sensors and recalculating historic data for an individual sensor
- How to update to the latest version of PRTG Traffic Grapher
- No data displayed in PRTG Live Graph
- What to do if the PRTG service does not start after shutting down the GUI
- What does the OTHER channel mean in PRTG Traffic Grapher
- Does my Cisco device (Router/Switch) support NetFlow Export?
- Details about the meaning of the "Busy Sensors" value in PRTG Traffic Grapher
- Solving "Could not connect" or "Error 10060" Messages when using SNMP
- Why we do not recommend installing software via Remote Desktop
- Issues with SNMP Helper Pro / Packet Sniffer sensors caused by DEP settings
- Installation of PRTG Traffic Grapher on Ubuntu with Wine
- How can I load/import my MIB files into PRTG or IPCheck?
- Do I need PRTG Traffic Grapher or IPCheck Server Monitor?
- Do I need the Freeware Edition or PRTG or one of the Commercial Editions?
- PRTG Traffic Grapher Version History (V4-6)
- How PRTG Traffic Grapher stores its data
- Common Pre-Sales Questions (8)
- Can I monitor the individual bandwidth usage of each port of my router?
- How many sensors can I monitor using PRTG Traffic Grapher?
- Does my Cisco device (Router/Switch) support NetFlow Export?
- Can I monitor the bandwidth usage of different protocols?
- Do I need PRTG Traffic Grapher or IPCheck Server Monitor?
- Do I need the Freeware Edition or PRTG or one of the Commercial Editions?
- Can I monitor the traffic of several computers using one leased line?
- Can I monitor the traffic of several websites running on one machine?
- Common Technical Problems (30)
- Using Paessler Network Card Packet Counter to debug problems with PRTG
- How to run the websites of IIS5/6 and PRTG on one machine
- Planning large installations of PRTG Traffic Grapher
- How to set up traffic monitoring with PRTG for various infrastructures
- The HELP function of my Paessler product does not work on Vista or Longhorn
- Why PRTG may stop recording data as soon as the Windows GUI is closed
- PRTG service is not started (Event ID 7000/Error 193 in system log)
- Checking and debugging your local IPs
- Changing existing PRTG custom sensors from Delta to Gauge (and vice-versa)
- Binding historic datasets to new sensors and recalculating historic data for an individual sensor
- Using Paessler SNMP Tester to debug SNMP problems with PRTG
- How to update to the latest version of PRTG Traffic Grapher
- No data displayed in PRTG Live Graph
- What to do if the PRTG service does not start after shutting down the GUI
- Using Paessler Netflow Tester to debug NetFlow installations
- How to move an installation of PRTG Traffic Grapher to another computer
- What to do if PRTG shows a "Multiple Instances Detected" message
- How to change the data storage drive and folder of PRTG Traffic Grapher
- What does the OTHER channel mean in PRTG Traffic Grapher
- What does the sensor name "Error converting OID" mean when creating sensors using an OIDLIB in PRTG
- What to do with "This program has been damaged" messages when starting Paessler programs
- Details about the meaning of the "Busy Sensors" value in PRTG Traffic Grapher
- Solving "Could not connect" or "Error 10060" Messages when using SNMP
- Why we do not recommend installing software via Remote Desktop
- Issues with SNMP Helper Pro / Packet Sniffer sensors caused by DEP settings
- Installation of PRTG Traffic Grapher on Ubuntu with Wine
- Installing the SNMP service on Windows NT/2000/XP/2003
- Analyzing runtime problems of PRTG Traffic Grapher
- Why do I see Huge Peaks or Spikes in Graphs for SNMP Sensors?
- What is shown in the "Coverage" column in data tables of PRTG Traffic Grapher?
- Data Storage and Access (10)
- How PRTG Traffic Grapher stores its data
- Upgrading from PRTG Version 3 to Version 6
- Upgrading from PRTG Version 4 to Version 6
- Changing existing PRTG custom sensors from Delta to Gauge (and vice-versa)
- Binding historic datasets to new sensors and recalculating historic data for an individual sensor
- How to update to the latest version of PRTG Traffic Grapher
- How to move an installation of PRTG Traffic Grapher to another computer
- What do the values in PRTG's exported CSV log file say?
- How to change the data storage drive and folder of PRTG Traffic Grapher
- How RAM memory is allocated when using top lists in PRTG Traffic Grapher
- Project Design and Planning (14)
- Planning large installations of PRTG Traffic Grapher
- Netflow 5 Filter Parameters supported by PRTG Traffic Grapher
- How to set up traffic monitoring with PRTG for various infrastructures
- Comparing PRTG's SNMP based monitoring with Netflow Monitoring and Packet Sniffer based monitoring
- How to Discern Excessive Bandwidth Usage using PRTG Traffic Grapher
- Changing existing PRTG custom sensors from Delta to Gauge (and vice-versa)
- Binding historic datasets to new sensors and recalculating historic data for an individual sensor
- How to update to the latest version of PRTG Traffic Grapher
- Using Paessler Netflow Tester to debug NetFlow installations
- How to move an installation of PRTG Traffic Grapher to another computer
- Does my Cisco device (Router/Switch) support NetFlow Export?
- How RAM memory is allocated when using top lists in PRTG Traffic Grapher
- Why we do not recommend installing software via Remote Desktop
- How PRTG's VoIP Features (QoS, and IP SLA Sensors) are Different or Unique as Compared to Competitive Solutions
- SNMP Related Topics (13)
- Changing existing PRTG custom sensors from Delta to Gauge (and vice-versa)
- Performing Silent Installations of SNMP Helper Freeware and SNMP Helper Pro
- What does the sensor name "Error converting OID" mean when creating sensors using an OIDLIB in PRTG
- Solving "Could not connect" or "Error 10060" Messages when using SNMP
- Issues with SNMP Helper Pro / Packet Sniffer sensors caused by DEP settings
- How can I load/import my MIB files into PRTG or IPCheck?
- Installing the SNMP service on Windows NT/2000/XP/2003
- SNMP, MIBs and OIDs - an Overview
- Finding MIB files for specific devices or systems
- How do I install the SNMP daemon on Linux machines?
- Using Paessler SNMP Tester to debug SNMP problems with PRTG
- Monitoring System Parameters like Memory, CPU and Disks on Linux Systems via SNMP
- How to find out OIDs for Custom SNMP sensors
- Tips and Tricks (PRTG 6) (24)
- Serving Web Pages of PRTG Traffic Grapher With Other Web Servers
- Why do I see Huge Peaks or Spikes in Graphs for SNMP Sensors?
- Monitoring System Parameters like Memory, CPU and Disks on Linux Systems via SNMP
- Automated License Key Installation for PRTG Traffic Grapher
- How to find out OIDs for Custom SNMP sensors
- Changing the port number of a sensor in the .prtg file manually
- How to Discern Excessive Bandwidth Usage using PRTG Traffic Grapher
- Changing existing PRTG custom sensors from Delta to Gauge (and vice-versa)
- Binding historic datasets to new sensors and recalculating historic data for an individual sensor
- How to update to the latest version of PRTG Traffic Grapher
- No data displayed in PRTG Live Graph
- What to do if the PRTG service does not start after shutting down the GUI
- How to move an installation of PRTG Traffic Grapher to another computer
- How to change the data storage drive and folder of PRTG Traffic Grapher
- What does the OTHER channel mean in PRTG Traffic Grapher
- How to set up audible notifications for PRTG and IPCheck using speech synthesis software
- How RAM memory is allocated when using top lists in PRTG Traffic Grapher
- Why we do not recommend installing software via Remote Desktop
- Installation of PRTG Traffic Grapher on Ubuntu with Wine
- Command Line Parameters and Exit Codes for Paessler Setups
- Customizing Panel Layouts for Custom Graphs
- How can I change the colors of the sensor list in the web interface of PRTG Traffic Grapher
- Using live graphs from PRTG in other webpages using static image URLs