Web Server Settings
Web Server Settings
The Web Server tab allows to set up the web server functionality.
You can enable / disable the internal web server by checking / unchecking the Enable Internal Webserver checkbox.
You can also define the Local IP address, as well as the Port. Usually port 80 is used for web server, but if this port is already used on your machine the second choice would be port 8080. Of course, any other desired port can be selected as long as it is not already being used by other applications.
If you also have other web servers running on the machine that you run PRTG Traffic Grapher on you must keep in mind that each port number can only be used by one server!
The option Write webserver access logfile generates a subdirectory entitled “weblog” in the data folder which contains an *.log file with the data access information of the web server in W3C format (see http://www.w3.org/TR/WD-logfile.html).
For Website Access Control you have two options:
· Unlimited Access: All data in the web interface can be accessed without any login, etc.
· Limited Access: Only users defined on the users page can log into the website.
For each sensor and each panel you can define what user groups can access their data.
More:
