Communication Settings for SNMP Sensors
Communication Settings for SNMP Sensors
In the Protocol section you can choose between SNMP Version 1, 2c and 3.
Under the Device Communication settings, you can define a Device Name / Alias for the sensor. In the field IP-Address you can configure the device’s IP address, as well as enter the appropriate Port number for the SNMP communication.
For SNMP V1 and V2c you can set the community string. The default value of this field is “public”.
For SNMP V3 you must set the security settings,
Authentication Mode and Password.
name=_D2HNOVMLPICTURE_>
To enable encryption please enter a Data Encryption Key. Leave the field empty to disable encryption.