Have PRTG setup on a Hyper V client virtual server. Trying to get a packet sniffer working but only having limited success. Only internat traffic is being captured. Have port mirroring setup on the switch. In Hyper V setup a virtual external network and mapped the PRTG server's virtual NIC to a physical NIC. The physical NIC is connected with a cat 5 cable to a hub that is connected to the mirrored port. I did notice these errors on the virtual server's event log: Port 'F1E9B707-2E68-4353-8940-DB71CC339B5A' was prevented from using MAC address '00-15-5D-01-DF-1C' because it is pinned to port '1B82FF67-1B36-42D9-954B-786154E8F2B9'. The mac address mentioned is the MAC of the PRTG server's virtual NIC. I had this working great on a VMware virtual server but trying to transition it to Hyper V. Any suggestions?
Have PRTG setup on a Hyper V client virtual server. Trying to get a packet sniffer working
Replies
Nobody has replied yet
Why not be the first?
Please log in or register to enter your reply.
Disclaimer: The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.